How to Identify Asbestos in Houses

Tips on How to Identify Asbestos in Houses

One of the most commonly used materials in the construction of houses in the last century was asbestos. This naturally occurring mineral was preferred due to its heat retardant qualities. Asbestos was used in areas where there was a fire threat such as fireplaces and near electrical installations so as to contain any fire threat.  This wide range use of asbestos in houses continued until 1970 when it was banned from commercial and residential purposes.

 

The use of asbestos in houses was banned because asbestos was linked to respiratory diseases. Scientists begun to note that people who were exposed to asbestos for long periods of times suffered from respiratory diseases such as lung scarring to cancer of the lungs. These connections of asbestos to diseases lead the CDC to ban its overall use in buildings and products. When you find asbestos in houses, have an expert remove it or ask for tips to remove the material for the safety of your family. Below is a detail guide on how to identify asbestos in your house. Therefore it is important for you to try and identify asbestos in houses especially if the house is more than 40 years old. The presence of asbestos in houses can expose you and your family to the dangers lung disease so it is advised that you be able to identify asbestos easily in your house. The best way to identify asbestos in houses is to first of all identify when the house was constructed. If the house was constructed prior to 1980s, then it is very likely that it contains some parts that consist of asbestos. In such a house, check the insulating tape on pipes on the house and if you see a thread like, orange colored material then that is asbestos. On tapings, it can be mostly found in pipe and valves. Another place you can find asbestos in houses is on fireplaces or in furnaces. This is because the material is fire resistant and it was the preferred material to use as an insulator in these places. It will be contained in a caulking material in the fireplace. The tiles of your house are another place you can find asbestos are on the tiles of the house. Many vinyl tiles have asbestos in the underlay, so consult a professional asbestos remover if you do find vinyl tiles in your home. The wall is another place to look at.

 

Asbestos in houses can normally be located to the in the plastering on the wall. These plaster and sometimes stucco coatings will have asbestos threads. As such a professional should be contacted to help with the removal of asbestos as the fibers once released in the air will cause a lot of harm to the family. Normally, if the asbestos is left undisturbed, it will not cause any harm, but this is a risk you cannot take, especially with kids in the house. At the first sign of asbestos, take the precautionary measures advised by experts and then consult a professional who will help with the removal.

Article publié pour la première fois le 24/10/2013

Related Posts:

How to identify asbestos

How to identify asbestos

Homes and buildings built after the mid 1980s are unlikely to contain asbestos-based construction materials. These materials were phased out in the 1980s, but it was used heavily in buildings/homes built from 1930 to 1980.

how to identify asbestos? Asbestos cannot easily be recognized. Unless a material is labeled as containing asbestos, just looking at it with the naked eye will not discern the presence of asbestos. There are still some ways to identify asbestos. These are not accurate but can give you an idea on how to identify asbestos:

-Sidings – Asbestos fibers were heavily used for making home sidings. Look at the thickness of paint on the siding. If there are many layers of paint, then it means the sliding is old enough to contain asbestos.

-Pipe insulation –  In the manufacturing process, asbestos pipe insulation was covered with a corrugated cardboard wrapper.And modern pipes are coated with heavy weight craft paper.Just see the exposed end of the pipe insulation. You can easily identify cardboard wrapper against craft paper.

– Floor tiles- Asbestos was also used heavily in making tiles and you can see them in old houses or renovated flooring.These tiles are typically black, brown or dark gray and tend to be much thicker than more modern, asbestos-free tiles. Most products which contain asbestos and can be inhaled are required to be labeled these days.

Article publié pour la première fois le 20/03/2013

Related Posts:

How to identify asbestos

How to identify asbestos Homes and buildings built after the mid 1980s are unlikely to contain asbestos-based construction materials. These materials were phased out in the 1980s, but it was used heavily in buildings/homes built from 1930 to 1980.

 

how to identify asbestos? Asbestos cannot easily be recognized. Unless a material is labeled as containing asbestos, just looking at it with the naked eye will not discern the presence of asbestos. There are still some ways to identify asbestos. These are not accurate but can give you an idea on how to identify asbestos: – Sidings – Asbestos fibers were heavily used for making home sidings. Look at the thickness of paint on the siding. If there are many layers of paint, then it means the sliding is old enough to contain asbestos. -Pipe insulation –  In the manufacturing process, asbestos pipe insulation was covered with a corrugated cardboard wrapper.And modern pipes are coated with heavy weight craft paper.Just see the exposed end of the pipe insulation. You can easily identify cardboard wrapper against craft paper. – Floor tiles- Asbestos was also used heavily in making tiles and you can see them in old houses or renovated flooring.These tiles are typically black, brown or dark gray and tend to be much thicker than more modern, asbestos-free tiles. Most products which contain asbestos and can be inhaled are required to be labeled these days.

Article publié pour la première fois le 22/07/2013

Related Posts: